Description

Product Description Description of the connection between modules: 1 :Find the end of the wire, cut a length of cover about 5cm (do not cut the copper wire, only cut the cover) 2 : Connect two strip light , make sure the copper wire are fully contact to each other. (please confirm the negative and positive is right) 3 : Use the insulating tape surrounding the connecting position to prevent the electric leakage The Modle Kits Connection: Step 1: remove the remote battery insulation film, check the remote batter is connected. Step 2: Connect the LED and mini DC adapter with a screwdriver, attention to positive and negative pole. Step 3: Separate LED strip. Connect the remote and plug. Finish! Good job. Features: Commercial advertisement signs backlight Channel letters backlight store front light Advertisement light box backlight & decoration sign Ideal replacement of incandescent and fluorescent lights LOGO advertising billboard, exposed luminous characters Suitable for boat cabin & deck lighting, stair, kitchen, courtesy, caravan, garden etc. Note : -20pcs led module each string, they can also be cut off on customer's requirement, be sure you cut the connect line between the strip. - The controller is optional , but the battery is not included. -Different Feet will send different Power Supply，but we we do not take responsibility for the installation,please let the profession man to install. Module Specifications: Type: 6 LED 5054 module Material: PVC Plastic LED Quantity: 6pcs each strip Standard Cascade: 20 strip one set Beam angle: 120 degree Waterproof level: IP65 Working Voltage: DC 12V Power: 0.25W / each led Dimension: 76*10*5mm / 2.99 * 0.39 * 0.20inch (each 6 led strip) Total length of each module with extension wire: 3m / 10ft Optional color: White, Warm White, Red, Green, Blue, Yellow Luminous Flux: 780-900lm/20pcs Working Temperature: -20~50℃ Package included: 1 x 10ft 6 LED 5054 module (20 strip one set) (remote controller and power supply is optional) powered by